Jerry Zou is a CKMOLD technical content contributor and project contact. His editorial scope covers injection mold manufacturing, plastic-part design for manufacturability, material selection, tooling cost, mold trials, production handoff and troubleshooting for international product and sourcing teams.
Editorial responsibility
Jerry’s articles are intended to help product engineers, procurement managers and hardware teams define the information needed before a molding or tooling decision. Technical ranges are presented as starting points and should be checked against the exact resin grade, part geometry, mold, machine and end-use requirements.
Topics covered
- Injection-molded part DFM and CAD release requirements
- Injection mold design, trials, validation and transfer
- Plastic material selection and processing constraints
- Tooling budgets, RFQ preparation and supplier evaluation
- Defect diagnosis and production handoff controls
Evidence and disclosure approach
Regulatory, safety and material-performance claims should be linked to primary sources where available. Hypothetical calculations and illustrative engineering scenarios are labeled as such. No unnamed customer result, reviewer credential or project performance claim should be treated as verified evidence.
Company information
For verified company details, certificate scope and project responsibilities, see About CKMOLD. To discuss a part, use the project review form; CAD files can be emailed directly to jerry@ckmold.com.
Articles by Jerry Zou
-
The Future of Sustainable Plastics: Are We Moving Beyond PLA to Next-Generation Biomaterials?
Are you tired of standard plastics harming the earth? Maybe you tried PLA, but it just cannot handle the heat or stress of real products. It is frustrating to design a great part only to have the material fail. Do not worry. New biomaterials are here to solve these problems and give you better options…
-
PLA and Bio-Based Plastics for EV Components: Where They Fit
Evaluate PLA and bio-based plastics for EV parts by heat, impact, moisture, aging, flammability, VOC, chemical exposure, molding and OEM validation.
-
High-Performance Plastics for Injection Molding
Select high-performance injection plastics by service temperature, chemicals, wear, dimensional stability, flame, electrical needs, processing and total cost.
-
ABS vs PC vs PLA vs Nylon vs TPU for Molded Parts
Compare ABS, PC, PLA, nylon and TPU for injection-molded parts by stiffness, impact, heat, chemicals, moisture, shrinkage, finish and processing risk.
-
Rubber vs TPU for Flexible Molded Parts
Choose thermoset rubber or TPU by sealing, compression set, heat, abrasion, chemicals, geometry, tooling, production volume and lifecycle needs.
-
TPU vs TPE vs TPC: Elastomer Selection Guide
Compare TPU, the wider TPE family and TPC elastomers by abrasion, compression set, heat, chemicals, overmolding, processing and cost.
-
PLA, PBS, PHB and Starch-Based Plastics Compared
Compare PLA, PBS, PHB and starch-based plastics by feedstock, properties, molding behavior, durability, composting evidence and supply risk.
-
PLA vs PHA: Application, Processing and End-of-Life Guide
Compare PLA and PHA by stiffness, toughness, heat, moisture, injection molding, cost and verified composting or biodegradation conditions.
-
ABS vs PLA vs PETG for 3D Printing
Compare ABS, PLA and PETG for 3D printing by heat, impact, moisture, fumes, ventilation, print behavior, durability and end-use validation.
-
EN 71 vs ASTM F963 vs ISO 8124 for ABS Toys
Compare EN 71, ASTM F963 and ISO 8124 for ABS toys by market, scope, mechanical and chemical hazards, testing and certification workflow.
-
Impact-Modified ABS for Automotive Parts
Use impact-modified ABS effectively by balancing low-temperature toughness, stiffness, heat, surface, weld lines, molding and vehicle-level validation.
-
ABS Automotive Interiors: Safety and Validation
Validate ABS automotive interior parts for flammability, heat, impact, VOC, odor, fogging, UV, chemical exposure and OEM requirements.